Well, doing Video is a lot time consuming, and I wish to add two shares in the #MultiBaggers 👇🏿 as I believe 3-5x over next couple of years in these, if not before ...

1. Yes Bank Ltd.
2. J&K Bank Ltd.

Disclaimer: I am or have been invested in all the shares recommended ⬇️⬆️

If there is one thing I have learned it is that people love bullshit. They buy bullshit stories from professional bullshit artists, accept bullshit philosophies, purchase bullshit how-to-books, vote for bullshitting politicians.

At first, I resisted believing this because it is illogical and dumb and frankly, doesn't reflect well on the human race of which I am a member (and thus have long been hopeful that it is more of a distinction than it actually turns out to be.)

But if you actually are interested in facts you begin to notice how little most people care for them. Sometimes it is because they are heard to learn and bullshit is so much more widely and easily available. Sometimes it is because facts make them uncomfortable about themselves.

Sometimes it is because just one tiny fact will upset a whole worldview that has grown as comfortable as an overstuffed chair. (Settling into such worldviews is a lot like settling into chairs like that because the longer you're there and the deeper you sink...

...the harder it is to hoist yourself up and out of your fat-assed intellectual laziness.) But I actually think the reason people have such an appetite for bullshit goes deeper, goes to an aspect of ourselves we just can't accept.

What Happened To Bhakt Prahlad after Hiranyakashipu Vadh
#Thread
Prahlada became the mighty king of the Asuras after Shri Narsimha killed Hiranyakashipu. Prahlada was even more powerful than his father, Hiranyakashipu ever was. He enjoyed the love and respect of his subjects.

By virtue of his good behaviour, Prahlada conquered the three worlds easily and Indra ran away from the Heavens. Indra then deceived Prahlada into giving him the power of his behaviour and Prahlada lost control of the three worlds.

Asuras grew angry at the Devas for taking advantage of their King's virtuous behaviour and invaded the heavens. The Devas, afraid of the Asuras, enlisted the help of human Kings such as Yayati, Raji and Kakutstha and defeated them.

Prahlada attacked the gods and defeated Indra in battle, forcing the King of the Gods to run for his life. Indra sought help of Lord Vishnu. Infused with his power, Indra defeated Prahlada. The latter understood that Vishnu was helping Indra in battle and he withdrew his forces.

Prahlada first gave his kingdom to Andhaka, but the latter was defeated by Shiva. So Prahlada gave it to his son Virochana and undertook a Tirtha Yatra.

I want to explain what happened to tumblr overnight. And why Twitter as reached it's dream (or have come ever so close to it)

Yahoo, who bought Tumblr years ago, used to have a huge adult presence on the early net. They allowed adult groups and what not.

However, people and bots (just like now) misused the service, and Yahoo were forced to make a choice. They made private the groups (and later closed them down and sold some of it to other companies) and then ended their chatrooms on yahoo messenger...

after a incident with one of the chatrooms vid cams. The damage was done, Yahoo Messenger lost a lot of people - and with the closing of the groups - backpage and Craigslist came more important.

Now backpage is no more and Craigslist is slowly passing away. Tumblr had a semi strong community, but once 2014 came around and both porn, and political bots exploded the quality started to go down,

1. #Qanon told us that Saudi Arabia is a central piece of the puzzle in taking out the Deep State...we are watching the Deep State attempt to remove Crown Prince MBS and disrupt Pres Trump's administration's ties with MBS and the "new" Saudi/US coalition. Early in his admin,

2....@Potus sent Jared Kushner (JK) to SA on an undisclosed trip and told King Salman that business as usual was over, and if he wanted Pres Trump's support, Prince Alwaleed would have to be divested of $ and power; Alwaleed is one of top Deep State $ men and was tied to HRC.

3. @Potus knew that before he could begin cleansing the US and the rest of the world of the DS, he would have to cut one of the financial head's off the snake (Alwaleed). After JK met w/ King Salman, Alwaleed was arrested and divested of billions; MBS became leader of SA.

4. SA loves Pres Trump because he's a man of his word; SA could not trust Hussein or Clintons because they use SA for oil and leverage; SA has many factions, but essentially you have the new and upcoming SA that is attempting to modernize through Crown Prince MBS, and then you

5...have the old guard represented by Alwaleed who was one of the Deep State financial heads and loyal to the DS more than SA; SA knew Hussein was financing Iran to hold western world hostage, and SA was caught in middle of Deep State black mail; this is why @Potus was celebrated

Read through a forum thread on Chastity Mansion to see who is talking about the Edge-o-Matic and figure out what more to address regarding frequent questions, as well as scout out user feedback. Here's some thoughts you can carry back to the forums!

My website doesn't have any product reviews, but people scatter them everywhere else in forums, tweets, xtube vids, etc.

If you ARE a previous customer, and you like the thing, can you drop a review on my site to help others?

The price is steep, but that's the amount of coins I calculated to make these. I have several spreadsheets calculating every expense involved with this project.

The current cost sustains production and development of new tech, and is helping create jobs. We are 2 people now!!

It IS 3D printed, because injection molding is orders of magnitude more expensive for the initial tooling, and I am still making small revisions to the enclosures.

Injection molded plastics are a six thousand dollar commitment for fifteen cent parts. Great for mass mfg.

Also, if you didn't know, 3D printing technology allows for some shapes which would be difficult, expensive, or impossible on injection molding or milled parts!!

Undercuts, which I use in this design, require special lifters to mold that cost a tremendous fortune.