#TATAMETALIKS
see how demand supply zone or Turning points working simple entry close abv zone exit close below zone Ride to next levels
#AhmedabadNest #process

Read through a forum thread on Chastity Mansion to see who is talking about the Edge-o-Matic and figure out what more to address regarding frequent questions, as well as scout out user feedback. Here's some thoughts you can carry back to the forums!

My website doesn't have any product reviews, but people scatter them everywhere else in forums, tweets, xtube vids, etc.

If you ARE a previous customer, and you like the thing, can you drop a review on my site to help others?

The price is steep, but that's the amount of coins I calculated to make these. I have several spreadsheets calculating every expense involved with this project.

The current cost sustains production and development of new tech, and is helping create jobs. We are 2 people now!!

It IS 3D printed, because injection molding is orders of magnitude more expensive for the initial tooling, and I am still making small revisions to the enclosures.

Injection molded plastics are a six thousand dollar commitment for fifteen cent parts. Great for mass mfg.

Also, if you didn't know, 3D printing technology allows for some shapes which would be difficult, expensive, or impossible on injection molding or milled parts!!

Undercuts, which I use in this design, require special lifters to mold that cost a tremendous fortune.

1/ I am seeing more and more founder secondary in venture rounds (Secondary = founders selling some of their shares before some other shareholders are able). Series B-D. I see both as an investor and through entrepreneur circles.

2/ I like secondary for entrepreneurs. Moderation is key but in a lot of situations I think it helps accelerate the co. Lots of very smart investors disagree. Here are my thoughts.

3/ Magnitude: My basic rule of thumb from what I see is market is 4+ yrs and up to 10% of founder’s equity stake with some $ cap that makes sense given stage etc. (typically <$10m)

4/ The entrepreneurial journey is brutally hard. Giving some financial relief helps remove one piece of pressure. I don’t think that secondary in the magnitude mentioned impacts the drive/persistence of great entrepreneurs.

5/ That secondary means they will be able to just sleep knowing they can pay their kids’ tuition. Secondary will make most founders better at their jobs, thus accelerating the co.

Thread: History of Mogadishu and it’s conquest by Imaam Al Yaqubi

One of the First Imaams of the Hiraab Imamate was Mohamed Ibn Imaam Ahmed ibn Imam Ahmed Ibn Imaam Mohamoud Ibn Imaam Cumar Halol Al Yacquubi (Abgaal) during the year 1097 hijri.

After the collapse of the Ajuuran Abgaal nomads from the interior had started moving to take over the strategic port town of Mogadishu which was then under the muzzafar dynasty. By the 1600s Abgaal warriors had captured the city and set up their base in shingaani.

Mogadishu at the time was a large and well known port town. The Abgaal clan taking over control allowed them to obtain political power and world wide recognition.

Under Imaam Yaqubi’s time in power it’s reported that French merchants had arrived at the port in 1701
and stayed for 11 days. They had attempted to take the city but were successfully repulsed.

A thing which I unironically and enthusiastically believe which is unpopular among smart people of my acquaintance: financial engineering has in the recent past and present contributed substantially to human welfare. We should hope to see more of it.

Maybe more geeks need to meet someone who says “My job is teleporting value across time and space.”

Financial engineering is sort of a squishy term. I don’t primarily mean payments infrastructure or financial rails, although both of those involve substantial engineering.

I mean more “We took a thing and performed some alchemy, and now have a new thing.”

Except instead of alchemy it is generally quite a bit of math, a huge amount of contract law and due diligence, often an impressive amount of ops work, and a dusting of technology that web devs would recognize as such.

#தினம்_ஒரு_திருவாசகம்
தொல்லை இரும்பிறவிச் சூழும் தளை நீக்கி
அல்லல் அறுத்து ஆனந்தம் ஆக்கியதே – எல்லை
மருவா நெறியளிக்கும் வாதவூர் எங்கோன்
திருவாசகம் என்னும் தேன்

பொருள்:
1.எப்போது ஆரம்பித்தது என அறியப்படமுடியாத தொலை காலமாக (தொல்லை)

2. இருந்து வரும் (இரும்)

3.பிறவிப் பயணத்திலே ஆழ்த்துகின்ற (பிறவி சூழும்)

4.அறியாமையாகிய இடரை (தளை)

5.அகற்றி (நீக்கி),

6.அதன் விளைவால் சுகதுக்கமெனும் துயரங்கள் விலக (அல்லல் அறுத்து),

7.முழுநிறைவாய்த் தன்னுளே இறைவனை உணர்த்துவதே (ஆனந்த மாக்கியதே),

8.பிறந்து இறக்கும் காலவெளிகளில் (எல்லை)

9.பிணைக்காமல் (மருவா)

10.காக்கும் மெய்யறிவினைத் தருகின்ற (நெறியளிக்கும்),

11.என் தலைவனான மாணிக்க வாசகரின் (வாதவூரெங்கோன்)

12.திருவாசகம் எனும் தேன் (திருவா சகமென்னுந் தேன்)

முதல்வரி: பிறவி என்பது முன்வினை விதையால் முளைப்பதோர் பெருமரம். அந்த ‘முன்வினை’ எங்கு ஆரம்பித்தது எனச் சொல்ல இயலாது. ஆனால் ‘அறியாமை’ ஒன்றே ஆசைக்கும்,, அச்சத்துக்கும் காரணம் என்பதால், அவையே வினைகளை விளைவிப்பன என்பதால், தொடர்ந்து வரும் பிறவிகளுக்கு, ‘அறியாமையே’ காரணம்

அறியாமைக்கு ஆரம்பம் கிடையாது. நமக்கு ஒரு பொருளைப் பற்றிய அறிவு எப்போதிருந்து இல்லை? அதைச் சொல்ல முடியாது. அதனாலேதான் முதலடியில், ஆரம்பமில்லாத அஞ்ஞானத்தை பிறவிகளுக்குக் காரணமாகச் சொல்லியது. ஆனால் அறியாமை, அறிவின் எழுச்சியால், அப்போதே முடிந்து விடும்.